Find Product:

TraSys™ Mould Release Agents2018-04-18T19:22:11+02:00
TraSys™ – “The Release Answer System”

TraSys™ is a series of high quality and reliable release agents. The fluorinated mould release agents are formulated as semi-permanent types based on alcohol or water and meet the highest requirements for quality and performance. As well as exceptional release and lubrication properties, the products in the TraSys™ series are extremely cost effective. This efficiency combined with outstanding product characteristics give TraSys™ a leading position worldwide for semi-permanent and aqueous release agents.

The products in the TraSys™ series are optimised for the application areas of rotational moulding release, injection moulding and for the mould release of rubber parts. With operating temperatures up to 330 °C and excellent mechanical stability, up to ten times more releases can be performed in comparison with conventional mould release agents. Some products in the series also provide increased corrosion protection.

TraSys™ for the injection moulding industry

The high-quality products in the TraSys™ series for the injection moulding industry have exceptional lubrication properties. Its outstanding product attributes make it a reliable and effective partner for many users.

TraSys™ 423 TraSys™ 424 TraSys™ 425 TraSys™ 512
Mould release agent typeFluorine compoundFluorine compoundFluorine compoundSiloxanes
Resin baseWaterWaterWaterWater
Removal methodWaterWatermechanicalWater
Mandrel typeFlexibleFlexibleRigidFlexible
Compatible compoundsEPDM, nitrile, neoprene, hypalon, CPE, siliconesEPDM, nitrile, neoprene, hypalon, CPE, siliconesEPDM, nitrile, neoprene, hypalon, CPE, siliconesEPDM, nitrile, neoprene, hypalon, CPE, silicones
Application typeImmersion bath, spraying, cloth, brushImmersion bath, spraying, cloth, brushImmersion bath, spraying, cloth, brushImmersion bath, spraying, cloth, brush
Corrosion protectionNoNoYes (high)No
Lubrication characteristicHigherHighHighestHigher
Other product attributesNo transfer or formationNo transfer or formationMinimal transfer or formationNo transfer or formation

TraSys™ Rubber Mould Release Agents

The rubber mould release agents in the TraSys™ series have exceptional release and lubrication properties and are extremely cost effective and environmentally friendly.

TraSys™ 9825TraSys™ 428TraSys™ 818
Mould release agent typeSemi-permanentSemi-permanentSemi-permanent
Resin baseWaterWaterWater
Typical ApplicationsMin. 132 °C/5 minutesMin. 132 °C/5 minutesMin. 132 °C/5 minutes
Max. operating temperature193 °C232 °C327 °C
Compatible compoundsEPDM, nitrile, neoprene, hypalon, CPE, siliconesEPDM, nitrile, neoprene, hypalon, CPE, siliconesEPDM, nitrile, neoprene, hypalon, CPE, silicones
ApplicationHeated FormHeated FormHeated Form
StirringlightlightNo
Product surfaceSatin-likeSlightly glossySatin-like
CommentParticularly suitable for special rubber compounds such as Vamac®, Viton®, Aflas®. Excellent adhesion to coated or polished surfaces.nHighest anti-friction characteristic, suitable for high flow injection mouldingSuitable for rubber-metal bonding, ideally suitable for silicone elastomers, good repair of permanent fluorine compounds

TraSys™ for rotational moulding release agents

The TraSys™ products optimised for rotational moulding parts set standards for reliability, stability and durability.

TraSys™ 420TraSys™ 414TraSys™ 500TraSys™ 715TraSys™ 2021
Release agent typeStandard application, semi-permanentDifficult application, semi-permanentStandard application, semi-permanentWeak release action, semi-permanentHigh gloss application, semi-permanent
Release agentFunctional resinsFunctional resinsFluorine compoundFunctional resinsFunctional resins
Carrier liquidWaterWaterWaterWaterAlcohol
Freon / solventNo/noNo/noNo/noNo/noNo/yes
Typical applicationAll normal mould surfacesJoints of moving coresHigh temperatures, mould heating by flameLarge areas, with strong shrinkage>High gloss applications
Recommendation forLLDPE, LDPE, MDPE, HDPE, XLPE, PP, PC, nylon, plastisolsLLDPE, LDPE, MDPE, HDPE, XLPE, PP, PC, nylon, plastisolsLLDPE, LDPE, MDPE, HDPE, XLPE, PP, PC, nylon, plastisolsLLDPE, LDPE, MDPE, HDPE, XLPE, PP, PC, nylon, plastisolsLLDPE, LDPE, MDPE, HDPE, XLPE, PP, nylon, plastisols
Temperature for application50 °C – 60 °C50 °C – 60 °CApprox. 60 °C – 70 °C50 °C – 60 °C55 °C – 60 °C
Baking forMin. 135 °C/5 minutesMin. 135 °C/5 minutesMin. 135 °C/5 minutesMin. 135 °C/5 minutesMin. 135 °C/5 minutes
StirringLightLightLightLightLight
Product surfaceSemi glossSemi glossSemi glossSemi glossGlossy
Tool lifeLLDPE: 120 x
XLPE: 15–20 x
Not specifiedNot specifiedNot specifiedNot specified